L18050 DTF
Fix a print before you waste film.
Change one thing at a time. Record the film, profile and settings so you can repeat a good test.
Film won't load or feeds crooked
Check film orientation, the edges and the guide spacing. Try one short sheet. If paper senses correctly but film still fails, check the film path and sensors with the installer.
White is weak or missing
Run a nozzle check. If the white channel is missing there, check the white-ink feed first. If it appears in the check, confirm the profile and white layer in the RIP.
Lines across the print
Check the nozzles, the film path and feed consistency. Repeat a small sample and change one setting at a time. Ask for the correct service settings for your build if the lines persist.
Transfer looks different after pressing
Check film, application temperature, time and peel type against the consumable supplier's instructions. Test on a scrap of the same fabric.